MIL-STD-810F Dust Test Chamber

MIL-STD-810F Specifications

Industrial Blowing Dust Chamber designed to meet MIL-STD-810F specifications.
The system includes the following components:

Test Chamber to accommodate a 36"W x 36"H test item
Total System Dimensions: 120"H x 204"L x 96"W
Constructed with 11 gage cold rolled steel
Exterior Finish - High Temp Industrial Paint
48" x 48" Access Door
4" x 12" Ceramic View Ports
4" Access Ports (Access size adjustable)
Interior Lighting
Horizontal media baffle for material collection/cleanout
3" Tubular support frame for chamber and fan
Dust Injection Port
System grounded to customer supplied earth ground
Pressure Relief Valve with dust filter
Back-up Pressure Relief Valve
Part Screen

Inlet/Outlet Ductwork:

Pre dust chamber air straighteners
Flanged connections
Finish - High Temp Industrial Paint Exterior only
Pipe supports
Access Ports for cleaning

Reinforced Air Mover (Material Handling):

High temperature construction
25HP TEFC Inverter Duty Motor/V-Drive
Weight - 2,755 lbs

System Controls:

25HP Variable Frequency Drive, panel mounted

Air Velocity Transmitter:

Accuracy 5% FS Process 32-122 deg F/6% FS
Process 122-212 deg F
Designed for Dirty Air Stream
NIST A2LA Traceable Calibration

Humidity & Temperature Transmitter:

Relative Humidity - Thin-Film Polymer
Capacitor, Accuracy +/- 2%
Temperature - Thin-Film Platinum RTD,
Accuracy +/- 1° F
NIST A2LA Traceable Calibration
Designed for Dirty Air Stream

Dust Concentration Monitor:

Impulse Signature Extraction, Accuracy +/- 1%
Adjustment range - .01 mg/m3 - 1kg/m3
Velocity Compensation
Continuous Run Time
NIST A2LA Traceable Calibration

Automatic Relative Humidity Control:

Piping and control valves included
No contact with dirty air stream

Automatic Temperature Control:

Air Process Heater
Piping and control valves included
Dirty Process Air does not contact heating source

COMBINATION STARTER PANEL:

Maximum 25HP
IEC Rated Starter
Separate fusing for all motor loads
Custom Job I.D. Nameplate
Terminals for field connections
Lamacoid Nameplates
Stop / Start Push Buttons

Automated Control Panel, featuring:

Rotary Disconnect
UL Listed, Ventilated, NEMA 12 Indoor Enclosure
480 x 120 VAC control transformer
Fuseblock & fusing for starter and VFD.
Allen-Bradley PLC
Ethernet communications port
LCD Color Display
Control Panel and VFD mounted to a common support stand

Join our FREE Email Mailing List